First of all, this all started because I hate having stuff rolling and sliding around in the trunk. So after seeing the grid-it organizers and how expensive they were I decided to make one myself to the larger size I wanted. One of my main goals was not to modify the car permanently, so I utilized the anchor points on the back of the seat(usually for child seats). I won't go into the process as it is kinda self explanatory, but there are plenty or Youtube videos showing how to make these.
Materials:
1. Black board material from Home Depot (because it was already black so I didn't have to paint it)
Black Chalk Board (Common: 3/16 in. x 2 ft. x 4 ft.; Actual: 0.180 in. x 23.75 in. x 47.75 in.)-225490 - The Home Depot
2. Flat stock 1/2 inch wide, and about 36 inch long. (couldn't find the link on Home Depot)
3. 2 Hose clamps (you probably have some laying around)
4. 1 inch wide black elastic bands
5. Super Glue (gel type seemed to work better)
This is to show how the holes were cut and where the flat stock runs across. Hose clamps then go around the flat stock and the anchor points.
Flat stock and the clamps are hidden under the elastic.
I made larger sections in the weave to hold the larger spray bottles in the car.
Just some other example items.
Materials:
1. Black board material from Home Depot (because it was already black so I didn't have to paint it)
Black Chalk Board (Common: 3/16 in. x 2 ft. x 4 ft.; Actual: 0.180 in. x 23.75 in. x 47.75 in.)-225490 - The Home Depot
2. Flat stock 1/2 inch wide, and about 36 inch long. (couldn't find the link on Home Depot)
3. 2 Hose clamps (you probably have some laying around)
4. 1 inch wide black elastic bands
5. Super Glue (gel type seemed to work better)
This is to show how the holes were cut and where the flat stock runs across. Hose clamps then go around the flat stock and the anchor points.
Flat stock and the clamps are hidden under the elastic.

I made larger sections in the weave to hold the larger spray bottles in the car.

Just some other example items.
