Ford Focus ST Forum banner
1 - 8 of 8 Posts

Premium Member
2,837 Posts
Discussion Starter · #1 · (Edited)

Vivid Racing Presents: Agency Power Wing Risers for the Focus RS

MSRP $50 + Shipping. PM, call, or email for Focus RS Exclusive Pricing!

[email protected] | +1.480.966.3040 x230 |

Sometimes it’s the little things that can make the biggest difference. In terms of exterior modifications, there is an endless list of things you can do to change the appearance of your vehicle. Some people go all out with paint and body kits, while others prefer little subtle mods to improve over the factory components. This new modification for the Focus ST and Focus RS is just that, a subtle exterior mod. The new wing riser kits allow for an easy way to adjust the angle of the factory roof spoiler. With a few simple screws, you are able to adjust the rake on the spoiler to fit your preferences. This can make the rear of the vehicle look more aggressive and have an rally style appearance. The best part is, these are going for only $50. A cheap simple mod that you can do in your very own garage!

Product Information:

Get a more rally style look on your Ford Focus RS or Focus ST rear spoiler with the Agency Power wing risers! The heritage of the Ford Focus screams rally and enthusiasts are not only getting more power from the EcoBoost, they are adding tons of style too. The rear wing riser kit is a set of 7 3D printed spacers to give your RS rear spoiler a slight lift while adding a more aggressive rake. There are 4 different spacer profiles to add this change in fitment. These spacers are 3D printed with a high quality filament that is extremely strong and durable. Each spacer is designed for the contour and height to carry a clean, equal lift across the roof line. Available in black for a stealthy look, the spacer kit comes with all necessary hardware to install.


3D Printed Technology
Durable and Strong
Increase Rear Spoiler Rake
Easy Installation
Includes Necessary Hardware
Added Styling


Ford Focus RS 2016+
Ford Focus ST 2013+


Payment Methods:
- Credit/Debit Cards (Visa, MasterCard, Discover, American Express)
- PayPal
- Affirm – Now you can finance your parts!
- Bank Wire
- Bill Me Later
- AZ Orders will incur 7.8% sales tax
- All international orders (outside of US and Canada) require Bank Wire or PayPal

We have very competitive worldwide shipping rates. Most orders leave via FedEx, however we do use UPS, DHL, and various freight companies. The most efficient shipping method takes precedence. Expedited shipping is available by request.

Hours of Operation: We do not observe Daylight Savings Time in Arizona
March-October: M-F 9am-6pm PST
November-February: M-F 8am-5pm PST
We are closed for business Saturday and Sunday

Contact Information:
Phone: 480.966.3040 x230
Email: [email protected]

Please feel free to contact me via PM, Email, or Phone if you have any questions.

651 Posts

Premium Member
2,837 Posts
Discussion Starter · #5 ·
Does this kit come with plugs to cover the existing holes?
There will be the 3 small holes that the factory wing "clips" into. We do not include them because the factory design does not "seal" in that location. We have recommended getting body plugs at a hardware store for a few cents.



1,706 Posts
...because the factory design does not "seal" in that location.
I have to disagree with that. I just lifted my wing up two days ago and the OEM clips DID have a foam ring that does seal against the hole. i even tested it by pouring a little water down the roof line, and it rand right down into that hole and all over the package tray, it also wouldn't take too much spray going from washing your car to get right through that hole and then run down the plastics inside.

if they are really only a few cents, I would strongly recommend just including them in the kit to make it complete.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.