Ford Focus ST Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
468 Posts
Discussion Starter · #1 ·
Hey crew, haven't been on the forum in awhile but I'm hoping I can get some help on this one.

I've been downsizing on my vehicles and the ST is one car I just got rid of. Fortunately, I'm able to get my GTX 2867R turbo out of it which I'll get done in the next week or so.

With about 20k miles on it, synthetic oil changes every 4k miles, and SCT hand held, how much could I expect to get for it?

Not sure what the general consensus is on a pre-owned kit, and I'll be including the hand held since I have no use for it. Got rid of the ST and C5 in hopes of getting a C7. Still have the '16 5.0 and C6 Z51 so not sure which one I'll keep :crazy:

Thanks!
 

· Registered
Joined
·
862 Posts
1300-1500 I would think because you are going to include the handheld with it. I sold my 2867 for 1300 with just the lines that came with the kit post it for 1500 and I am pretty sure someone would be happy to have it with the programmer.
 

· Registered
Joined
·
468 Posts
Discussion Starter · #3 ·
So then $1,700 should be reasonable if the kit includes;

GTX2867r turbo with .64 A/R
ATP coolant/oil lines and bolts
CP-E exhale kit with Tial BOV
SCT X4 Tuner (I have the base tune for when you install the turbo, by Freektune)
Cobb rear motor mount (never installed, not even pulled out of the box)
Lathe Werks Shift knob
 
  • Like
Reactions: Pfiles

· Registered
Joined
·
1,086 Posts
So then $1,700 should be reasonable if the kit includes;

GTX2867r turbo with .64 A/R
ATP coolant/oil lines and bolts
CP-E exhale kit with Tial BOV
SCT X4 Tuner (I have the base tune for when you install the turbo, by Freektune)
Cobb rear motor mount (never installed, not even pulled out of the box)
Lathe Werks Shift knob
Thats a good asking price. And there is a lot of market for used big turbos. But most people ready to make that jump probably already own a tuner, rmm, and shift knob so I would post those separately.
 

· Registered
Joined
·
819 Posts
The cp-e exhale kit with the turbo could fetch you around 13-15. Hell if I was in the market right now for a BT I'd give you that without batting an eye


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Pfiles

· Registered
Joined
·
163 Posts
So then $1,700 should be reasonable if the kit includes;

GTX2867r turbo with .64 A/R
ATP coolant/oil lines and bolts
CP-E exhale kit with Tial BOV
SCT X4 Tuner (I have the base tune for when you install the turbo, by Freektune)
Cobb rear motor mount (never installed, not even pulled out of the box)
Lathe Werks Shift knob
When you post this on the F/S section ill definitely be interested. Ill keep an eye out.
 

· Registered
Joined
·
468 Posts
Discussion Starter · #7 ·
Updating this thread;

I'm at work but the turbo is off as well as the CP-E exhale kit.

Can't remember what all is included but the turbo is pieced together with all fittings, comes with an oil and coolant line, and silicone elbow. The exhale kit has lots of scratches and one end is slightly bent inward (will show picture tonight).

Thinking $1600 may be a good price.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top