Do you have more details on the scope of what problem you are having? Just posting a datalog with no other symptom information does not really help us help you. It looks like your hpfp is making frp when you push the throttle and at idle the frp looks normal 3-400 psi

 

When I press the throttle it seems like it’s hitting a limiter it’s stuttering and breaking up and when I was monitoring it with my accessport yesterday when it started to happen
My FRP command was going from 20% to 100 and back to zero going crazy and all over the place

 

*HPFP command

 

My FRP sensor just went out(just replaced it)
Mine would misfire like crazy at anything above 2.5k or like 25%throttle.

You monitoring misfires?
Code popped up for FRP too high but looking at data logs I was down to single digits at WOT

 

I can’t even WOT
I’ll have to check the codes when I get home cause I’m a dummy and didn’t do it right after it happened

 

I had same issues and it was the high pressure transducer on the fuel rail.

 

The code ended up being P0192
So it’s pointing to the sensor

 

It's up to you if you wanna risk it but I've got a spare sensor on a 1.6EB motor here you can have.
PNs match. 63k on this motor so it's probably still good.

 

Update…
Sensor was the culprit
Thanks for the suggestions and pointers