Ford Focus ST Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hey guys,

I recently picked up a full set of Recaro seats from a junkyard relatively cheap and I was wondering if anyone knows how to fully disassemble all of the seats (front and back). I would like to swap some of the parts from my ST1 seats being that the ST2 seats aren't perfect but are worth the money I paid for them.

What I would like to interchange:
- Front drivers track (screwed up from removal) and swap the passenger one while Im at it.
- Rear seat internals (ST2 seats are slightly bent from accident.)
- Remove the ST2 partial leather from the seat foam to clean the foam underneath.

I've looked through these forums and haven't found anything close to what I'm looking to do. Any help would be appreciated, Thanks!
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
@elyk864 Ill check out that thread, thanks
@Duchess I understand what your saying but all the pieces I want to change look to also be on the ST1 seats. I looked at the rails for the ST1 seats and the ST2 and they look identical, Im just looking to swap the ST2 rails with my ST1 seat rails because they slide much better. I wouldn't be spending anything unless I needed some bolts both ST1 and ST2 seats are manual and the same model year. The rear seats are pretty much identical also with the exception of the different cover being partial leather and yellow, I was thinking hey just swap the cover of the rear seats but I dont want to play trial and error on it and probably screw it up permanently.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top