Ford Focus ST Forum banner

RS WING by Austin Olmos

545 Views 12 Replies 6 Participants Last post by  Tpen
Firstly, if anything is a problem with my post in any way shape or form, Please inform me of whats the problem and i will change it immediately!!! I obviously don't wanna step on any toes here, I just really want to get this mans name out here in Thunder Dome! IMO, he really deserves to be plugged out here on the ORG. For sure one of the coolest dudes to work with and talented. Ill explain more in detail on in this thread!

So, i know there's loads of threads on RS wings specifically. A bunch of DIY's, mainly because it's cheaper that way and that is totally acceptable! If you're like me though, someone who is not very talented in paint or body work, has not very many hours to spend on said projects, but has money burning a hole in your pocket, then I would highly recommend getting with Mr. Olmos. For me, it has been very difficult to find trust worthy people to help with certain projects and ideas I have for the car to bring to life! I have been blown off, lied to. It really sucks for someone like me to want to\ keep trying to push forward to find these people, BUT when i finally have found these small minority people, i feel like it is my due diligence to spread their names in good faith, to not only to get their names out there because they truly deserve it and make it easier for others to find them! For me, I don't want others to be discouraged like i have been through the years. Sharing the knowledge that has been gathered will provide an ease for others to not wanna give up!

ENOUGH of the sad life experiences LOL!

I found Mr. Olmos on the Focus ST/RS page on FB a couple of months ago and have been eyeballing his work for the longest time. Man is pretty popular when it comes to the talent he brings to the table! He, also has an ST and RS that are just absolutely GORGEOUS cars! Ill try and convince him to post up here one of these days hopefully! Little disclaimer, when i deal with a small shop or a solo person, i tend to tell them to keep me updated through out the process of the work im paying for. Now, i understand that shops/people get very busy and don't have the time to share the whole entire process. THIS dude though, he shared almost every step of the way and I greatly appreciate it!!! This right here made the experience that more enjoyable and just couldn't wait for the end result! I'll just say, you want someone who is legit in every aspect, get with this man ASAP! Very rarely i build a friendship with people like this man, but BOY, i tell you what! The only thing i regret the most is not getting with this dude earlier on! I could go on forever, but i asked him if i could share his name on the forums. That's how much of a badass person he his, as the younger kids would say "this dude is legit, NO CAP FR FR ON GOD!".

onto the goodies now lol

I will post the pictures that i currently have and later i will try to post the videos he sent me from messenger! I'm missing the filling and sanding process of the RS emblems. I will have to download those and add them in the comments with the videos by phone later tonight at work lol! I'm currently rushing to get this posted up before i have to get ready for work.





My dumbass forgot to get a picture of everything wrapped up. But everything came bubble wrapped in their own single packages. Disregard the baby toys lol, i was WAYYYY to excited to get this thing out and put together!

Also, the lighting in my house is terrible.







If yall see smudges, that was my daughters greasy fingers from her snacks smdh! It will for sure get a nice clean wax to get rid of the smudges lol!









What my wing would have looked like if I had just gone with black instead of the carbon fiber!

I'm currently at my limit for pictures for this first post!
I hope these pictures alone will tell the story im trying to convey here!
Again, I will add more pictures and those videos later on tonight!

The attention to detail is just outstanding!

I couldn't be happier with my purchase! DEFFINENTLY get with Austin if you happen to go down the same route! He would be more than happy to get you squared away; he deserves every penny you spend with him!

As the kids would say again " Boy has that DAWG in him!". lol

I'm really pressed for time now, so I'm going to finish up by saying, this was the best customer service and experience I have currently had with someone for a long time, and I hope to spend more of my money in the future on his work! He also warranties his work; he is not afraid to fix any issues you happen to have with the product you receive. So, please give him a shout, you will not be disappointed!

If you have any questions, I will try to answer them when I can and in the most descriptive way possible!

Cheers, Kenzie!

Attachments

See less See more
10
  • Like
  • Love
Reactions: 4
1 - 13 of 13 Posts
I'm not generally big on big wings and carbon fiber, but I have to admit that is a very sexy work of art !
馃憤馃槑馃嵒
  • Like
Reactions: 4
I'm not generally big on big wings and carbon fiber, but I have to admit that is a very sexy work of art !
馃憤馃槑馃嵒
I told him that he's crazy talented with his work! IMO, you gotta be careful with carbon fiber on exterior items. Not a fan of carbon fiber everything unless obviously it's a Koenigsegg agera R lol.
Also gonna bump this.
2 local guys have had wings painted by him. Both are fantastic quality!
One wing had one issue one one side where the RS was sort of "Printing" in direct sunlight viewed at a steep angle. The wing owner PMED Austin, who promptly had it shipped back to his place, fixed it, resanded it and resent it out with no questions asked.
I was really imoressed with the turnaround time on that. 10/10 would reccomend.
  • Like
  • Love
  • Helpful
Reactions: 4
If it's quality it will speak for itself! Austin is a great dude too. We've helped him out with parts in the past.

If I hadn't gone big ol wing, I'd probably be rocking one of these.
  • Like
Reactions: 1
Also gonna bump this.
2 local guys have had wings painted by him. Both are fantastic quality!
One wing had one issue one one side where the RS was sort of "Printing" in direct sunlight viewed at a steep angle. The wing owner PMED Austin, who promptly had it shipped back to his place, fixed it, resanded it and resent it out with no questions asked.
I was really imoressed with the turnaround time on that. 10/10 would reccomend.
If it's quality it will speak for itself! Austin is a great dude too. We've helped him out with parts in the past.

If I hadn't gone big ol wing, I'd probably be rocking one of these.
The man deserves all the recognition he can get! 馃
  • Like
Reactions: 1
Do you have pics of it mounted? I haven鈥檛 seen one colour matched like this.
Do you have pics of it mounted? I haven鈥檛 seen one colour matched like this.
no i do not currently. i can ask austin tommorrow if he has one mounted in the same color!
  • Like
Reactions: 1
Nice. That is very clean.
  • Like
Reactions: 2
1 - 13 of 13 Posts
Top