Ford Focus ST Forum banner

need help with BOV

1189 Views 3 Replies 3 Participants Last post by  Bryman13
I'm installing a turbosmart 50/50 Kompact Shortie BOV

(Turbosmart TS-0203-1064 Focus RS Blow Off Valve Kompact Dual Port 16)

and I'm just curious as to how "soft" or "hard" I should make it with a stock setup. Thanks.


Sent from my iPhone using Tapatalk
1 - 1 of 4 Posts
I'm installing a turbosmart 50/50 Kompact Shortie BOV

(Turbosmart TS-0203-1064 Focus RS Blow Off Valve Kompact Dual Port 16)

and I'm just curious as to how "soft" or "hard" I should make it with a stock setup. Thanks.


Sent from my iPhone using Tapatalk
They told me to keep it at the setting it's set at from the factory. I fiddled with mine though so I had to get it sorted out. I installed it, and took it out for a drive and used my Cobb AP to see what my peak boost was. I'm Cobb Stage 1, so my peak boost may be different than yours depending if you have a aftermarket tune or not. But my peak boost before the install was around 22 psi, after install I was getting 17-19. I opened the BOV up until I was getting peak boost numbers similar to what they were before.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top