Ford Focus ST Forum banner

61 - 65 of 65 Posts

·
Vendor
Joined
·
220 Posts
Discussion Starter #63
Congrats to winners of the #AWERowdyRevChallenge.
• Evan Patrick (@sir_schmitty__fahrvergnugen), Touring Edition-equipped B8.5 S4.
• Darian Schubring (@dschubring), Track Edition-equipped Mk6 Jetta 2.5L.
• Dylan Joyal (@435i_stella), Touring Edition-equipped F32 435i.
• Aaron Morris (@aaron_morris_), Touring Edition-equipped S197 Mustang GT.
• Chris Beattie (@canadian_chris), Track Edition-equipped Mk3 Focus ST.

 

·
Vendor
2016 Focus ST
Joined
·
5 Posts
As everyone is getting their FoSTs ready for the summer, I'm getting a lot of questions regarding Tip Cleaning. We have an FAQ section on our website that covers this and other important questions you might have.

Check out the care and feeding of your AWE tips here:


Pro-Tip: Mark the tip location on the exhaust pipe with a Sharpie prior to removal for easy and fast alignment when you reinstall.

Check out our other FAQ's here.
 

·
Vendor
2016 Focus ST
Joined
·
5 Posts
FAQ Tip Clamp Installation - Anti-Seize
I know this owners group is very likely familiar with this copper or nickel based wonder compound, but for those that are getting ready to install their systems, grab that anti-seize because you'll need it for the threads on the tip clamps! Just a little dab or brush. My Pro Tip: Loosen the clamp and put a dab just below the upper barrel nut, and then work the Anti-seize through to make sure everything is good and ready for install.



Unlike the clamps on the pipes (60lb ft of torque), the tips clamps are going to be 18-20lb ft. We generally go by feel.
 
61 - 65 of 65 Posts
Top