Ford Focus ST Forum banner

1 - 20 of 35 Posts

·
Registered
Joined
·
418 Posts
Discussion Starter #1
We have redesigned the Breedt Intake Manifold in several ways, mainly to compliment the stock turbo:

- Plenum size reduced

- Corners of the Plenum round to help flow into 1 and 4

- The velocity stacks have the same ratio but shorted to increase airflow velocity

- Inlet size from throttle body to the plenum has been reduced in size

- Easier and faster production time

- Optional Teflon spacer to help keep heat transfer to the intake down (Will be available for current owners of our Intake Manifold)


DSC_0197.JPG
 

·
Registered
Joined
·
418 Posts
Discussion Starter #3
We are doing testing on the new design currently. Also, 3 have been sent to England for testing by a company there.
 

·
Registered
Joined
·
55 Posts
i am trying to be nice about this but you really need injector ports to sell this or some hard facts about gains your customers will get out of the product.
 

·
Registered
Joined
·
604 Posts
Thanks, @rainier446

OP don't see it (phenolic space) in your store... please advise.

Thanks.
 

·
Registered
Joined
·
283 Posts

·
Registered
Joined
·
1,760 Posts
subb'd for results!!!
 

·
Registered
Joined
·
604 Posts

·
Registered
Joined
·
2,409 Posts
Oh Sorry... no this: Optional Teflon spacer to help keep heat transfer to the intake down (Will be available for current owners of our Intake Manifold)
I am looking forward to this too, for my Manifold.

Bobby9621 Build Sponsored by edgeautosport sent from mobile
 

·
Registered
Joined
·
1,345 Posts
Any updates on this??
 

·
Registered
Joined
·
1,345 Posts
This item still coming out??
It sure would add alot of sex appeal to my car:D
 

·
Registered
Joined
·
1,345 Posts
Watch from :12 min on. I see the same thing happening with our cars....
I do remember them sending there new improved intake manifold overseas for testing quite some time ago,would be interesting to know what they found out.
Maybe breedt will chime in and give us some info on this manifold piece.
 

·
Registered
Joined
·
1,086 Posts
We have redesigned the Breedt Intake Manifold in several ways, mainly to compliment the stock turbo:

- Plenum size reduced

- Corners of the Plenum round to help flow into 1 and 4

- The velocity stacks have the same ratio but shorted to increase airflow velocity

- Inlet size from throttle body to the plenum has been reduced in size

- Easier and faster production time

- Optional Teflon spacer to help keep heat transfer to the intake down (Will be available for current owners of our Intake Manifold)


View attachment 83454
Any update on this? I looked on your site however there is no listing for this or the spacer. I am very interested in buying one.
 
1 - 20 of 35 Posts
Top