[m0usey929]

So far I have installed the rear coil-overs but I don't know how to get the front sway bar end-link off so I can remove the strut. Does anyone know how to do this, because it's much different than the 2013-2014 models.

Thanks a bunch!

 

[xrayruester]

Yes, I do know how. You will need a pass through socket set. You can get one from home depot for under $20 dollars. You'll also need some Allen keys as well, make sure they are long and thin enough to fit through the pass through set.
VVVThis set is probably the cheapest you can find in a store.

Husky 3/8 in. Drive Universal Pass-Thru Set (28-Piece) HUVTHRU28PC at The Home Depot - Mobile

 

[crashmw]

Do you recall what size was needed? Want to make sure my set has the correct size...

CrashMW