Really, nothing on the interface updating?

 

I'm using the EML327 bluetooth device, and I get the "can't init EML" error, so do you know what are the PC COM# parameters and which parameters use into the foCCCus app?, and if the car should be running or just the switch on?, Thanks

 

I used the "on" position and 500,000 rate. Then try both ports, one of them will work.

If 500,000 doesn't work try 50,000. Mine was finicky and worked both ways.

 

Current version: .8.4.
Wiki: FoCCCus - FoCCCus Tools Very sparsely populated with usable information.
Unless you can read russian you will need google translate to read from the site.

I thought I would start a new post because the old one had 22 pages of info and no real way to arrange it. That original post should continue to be used with only pertinent info here. I would like to maintain the first 4 posts as tested and working mods, types of proven code readers used with links to where users bought them, and any other decent reads on the subject of calibrations, obd2, and CAN. Accessport info is welcome as well.

Link to original post: Focccus PC app as-built editor AND all around reprogrammer

FoCCCus is a Central Configuration utility that allows users to modify certain parameters of their Ford Focus Generation 3 models. The program is in beta and the current version is .8.4 and is built by a russian developer who goes by the handle of "xgloom." This program is the real deal folks. Some of these parameters we have access to dealers cant even do.

This program has been updated many times and now works many different model cars. Fusion(Mondeo), Cmax, Bmax, F150, Focus(all Mk3 versions), Explorer,

tested and fully working mods:
1. Global open/close ie,. key fob window control - BCM HS-CAN - Change parameter#184 to enabled and click write to BCM
2. Shift light - turn on or off - Change Paramter #178 to "Without Shift Indication"
3. Aftermarket HIDs without a resistor - Paramter#14 Changed to Alternative HID
4. (Experimental) reflash of individual modules - Apparently this works but ive not read of anyone in the US successfully completing the procedure.
5. OEM Cruise Control added to Ford Focus SE with Sync: use option #23 Cruise Control set to "with Cruise Control"
6 Add Hill Assist to non ST model
7. Turn on ecoscout display
8. Windshield wiper motor calibration
9. Foglights on WITH High Beams. Legality varies between states. Change Parameter #18 to 02 - Foglamp.

You forgot TMPS disable
Reset or Disable Tire Pressure Monitoring Service (TPMS) | Capital ST Club

 

Don't know if anyone can help?

I cannot edit my 2015MY Focus as built configuration. I have tried Focccus and get the unable to load secondary bootloader error when trying to load from the car. I have tried to locate the calibration file but also cannot find it. The file listed both in Focccus and Forscan is F1FT-14C094-AD. Interestingly, I have access to IDS and this fails to read the configuration of the car BCM. I would like to remove the troublesome TPMS, set auto locking by speed and global closure of windows. Any ideas please?

Thanks in advance.

 

Just did this mod to my 14' ST1. I used the ELM327 with MS CAN mod. I added Fog with High beams, Emergency brake light flashing (hazard warning flash under heavy breaking), Global windows and removed the "you're not shifting when I want you to" light. Only thing I haven't tested (or have yet to see work) is the emergency hazard flashers. But I was only going max 25 in the parking lot at work. I'm thinking it only engages at speeds above 35 maybe?

 

Next time you back in try and figure out the DRL's. I've got a 2013 ST2 and couldn't get it to work on mine.