Ford Focus ST Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Hey guys I recently purchased a 2016 ST 3. Picked up and AP V3 and am wondering if I am able to use Flat foot shifting or WOT shifting (whatever you wanna call it) with the Stage 1 93 Octane Cobb OTS Map? I have been told you can but cant seem to find any information as to the parameters that need to be met or if a custom tune is required or if it can be done with just the OTS maps. my Current version is Stage 1 93 Octane V320 if that helps at all.
Thanks
Colby
 

· Registered
Joined
·
95 Posts
I'm running the OTS stage 1 91 octane on the v400 map and I use the flat foot shifting. Works flawlessly. Kinda weird at first but as long as you have the gas pedal fully depressed it should work. Don't make the same mistake that I did; I lifted the gas pedal last minute and pressed the clutch at the same time which made the car bounce off the rev limiter. Scared the sh*t out of me and it didn't sound good at all :shocked:
 

· Registered
Joined
·
346 Posts
Hey guys I recently purchased a 2016 ST 3. Picked up and AP V3 and am wondering if I am able to use Flat foot shifting or WOT shifting (whatever you wanna call it) with the Stage 1 93 Octane Cobb OTS Map? I have been told you can but cant seem to find any information as to the parameters that need to be met or if a custom tune is required or if it can be done with just the OTS maps. my Current version is Stage 1 93 Octane V320 if that helps at all.
Thanks
Colby
Can be done with the OTS maps. Need the RPMs over 5500 and WOT (or 80% throttle with latest map I believe). Simple as that.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top