Ford Focus ST Forum banner

Baldwin's 15 FoST3

20104 Views 161 Replies 24 Participants Last post by  nickbaldwin86
9
Purchased my 2015 ST3 package Focus back in June 28 of 2015 with 2 miles on delivery. Today it has 91,000+ and counting slower than it was because of my much shorter commute and commuter car.

List of everything I have done to my car to date and will add more I am sure. I am not even going to get into the LONG list of items I want to do.

Engine/Transmission:
Steeda Intake
Steeda symposer delete
GReddy 3" Downpipe
GReddy 3" Cat Back Exhaust
TIAL BOV custom hot side pipe to engine bay
Depo Racing charge Pipes
Depo Racing 3.5" Intercooler
Cp-e xFlex Rear Motor Mount Stage2
Cobb Accessport V3 on Stage 3 tune Tuned by Tune Plus+
FSWERKS Aluminum Shift Bracket Bushing Kit
Mountune Quick-Shift
Mountune Upgraded Solid Shift Cable Bushing Set
Redline Tuning hood struts
Snow Performance stage 1 methanol injection
NGK HX plugs gapped at .026
Ford Performance air snorkel
Spectre Air Duct kit
NAPA Auto 1342 oversized oil filter
Optima Red Top 35
Steeda Clutch Spring
Clutch masters Stainless Steel line
Ford Performance short shift
PowerFlex Engine mount (Street)
Baldwinracing86 downpipe bracket

Interior:
Anarchy Motive Titan Shift knob
Husky Floor mats
Start Button relocated
3M wrapped bits
Cobra Dash-cam (hardwired)
Sparco 4 point (for autocross events only!)

Exterior:
Octane Academy badges
Craven Speed ST 2" shorty antenna
ZL1 Add-ons Rock Guards
COBB rear wiper delete
Transformer badge
customcargrills.com (custom lower grill replacement)
Drake Muscle Cars Hood vents

Wheels:
Yokohama Advan Racing 18X9.5 +35 wheels Bronze w/ Mich PS4S 245/40/18
Stock "Snowflake" winter wheels painted bronze w/ Mich A/S3+ 235/40/18

Suspension/Chassis:
ST Suspension Coil-overs
ST Suspension rear sway bar
Pierce Motorsports front 6 Point Tiebar Bracer
Massive Rear Shock Tower Brace (picture on page 5)
TB Performance Products Rear Traction Bar
TB Performance Products Front Strut Bar
TB Performance Products Front Crash Bar
TB Performance Rear Mid Chassis Brace
Steeda bolt on Jacking Rails

Brakes:
RS Brembo Brakes with TCE SS lines
StopTech stainless steel brake lines rear
AMSOIL Synthetic brake fluid


Course more pictures can be found on my Instagram page @baldwinracing86

Land vehicle Vehicle Car Automotive design Rim


Land vehicle Vehicle Alloy wheel Tire Rim


Land vehicle Vehicle Car Motor vehicle Automotive design


Land vehicle Vehicle Car Motor vehicle Automotive design


Land vehicle Vehicle Car Rim Automotive design


Electronics Technology Design Footwear Metal


Electronics Vehicle Multimedia Car Technology


374350

Attachments

See less See more
  • Like
Reactions: 3
1 - 20 of 162 Posts
And another one
This is why I love the magnetic metallic! It looks so good :D
  • Like
Reactions: 2
About time, geez.
About time, geez.
Yeah can't say why I didn't create a build thread, :sorry:

but I assumed it was easier to do this than it would be to try and fit that list into my signature... HAHA
Yeah can't say why I didn't create a build thread, :sorry:

but I assumed it was easier to do this than it would be to try and fit that list into my signature... HAHA
If a mod list fits in a sig, then you need to mod more, lol
  • Like
Reactions: 2
If a mod list fits in a sig, then you need to mod more, lol
RIGHT! yeah my car is pretty modded up. I mean I am scared to have anyone else but me working on it because I don't want someone not knowing what I did doing something to it.

I don't think anyone would want me posting if my sig line took up a page under my one line post :popped out:
RIGHT! yeah my car is pretty modded up. I mean I am scared to have anyone else but me working on it because I don't want someone not knowing what I did doing something to it.

I don't think anyone would want me posting if my sig line took up a page under my one line post :popped out:
Lol, I know the feeling.
Purchased my 2015 ST3 package Focus back in June 28 of 2015 with 2 miles on delivery. Today it has 80,000+ and counting slower than it was because of my much shorter commute.

List of everything I have done to my car to date and will add more I am sure. I am not even going to get into the LONG list of items I want to do.

Engine:
MELE Design Firm Battery box with Odyssey PC680 battery
Steeda Intake
Steeda symposer delete
GReddy 3" Downpipe
GReddy 3" Cat Back Exhaust
TIAL BOV custom hot side pipe to engine bay
Depo Racing charge Pipes
Depo Racing 3.5" Intercooler
Cp-e xFlex Rear Motor Mount Stage2
Cobb Accessport V3 on Stage 3 tune Tuned by Tune Plus+
FSWERKS Aluminum Shift Bracket Bushing Kit
Mountune Quick-Shift
Mountune Upgraded Solid Shift Cable Bushing Set
Redline Tuning hood struts
Snow Performance stage 1 methanol injection
NGK 6510 step colder plugs
Ford Performance air snorkel
Spectre Air Duct kit
NAPA Auto 1342 oversized oil filter


Interior:
Ford Performance short shift
Anarchy Motive Titan Shift knob
Husky Floor mats
Start Button relocated
Steeda Clutch Spring
3M wrapped bits
Cobra Dash-cam (hardwired)

Exterior:
Octane Academy badges
Craven Speed ST 2" shorty antenna
ZL1 Add-ons Rock Guards
COBB rear wiper delete
3M wrapped pillars
Transformer badge

Wheels:
Yokohama Advan Racing 18X9.5 wheels w/ Mich PS4S 245/40/18
Stock "Snowflake" winter wheels painted bronze w/ Mich A/S3+ 235/40/18

Suspension:
ST Suspension Coilovers
ST Suspension rear sway bar
Pierce Motorsports front 6 Point Tiebar Bracer

Brakes:
StopTech stainless steel brake lines
Painted black Brake Calipers
AMSOIL Synthetic brake fluid

Course more pictures can be found on my Instagram page ;)

View attachment 352961

View attachment 352963

View attachment 352965

View attachment 352967

View attachment 352969
curious as to how did you move the push button down the their?
3
curious as to how did you move the push button down the their?
black magic...

Remove stuff
Land vehicle Vehicle Car Auto part Center console


drill 12v port larger
Solder wires to extend harness for push button. (sorry no pictures but kinda straight forward so)
Hammer drill Hydraulic rescue tools Vehicle Tool Machine


Put Humpty back together again and take a sweet picture ;)
Electronics Technology Design Footwear Metal
See less See more
  • Like
Reactions: 1
black magic...

Remove stuff
View attachment 353631

drill 12v port larger
Solder wires to extend harness for push button. (sorry no pictures but kinda straight forward so)
View attachment 353633

Put Humpty back together again and take a sweet picture ;)
View attachment 353635
Looks great, I really like mine there too,
Land vehicle Vehicle Car Center console Gear shift
See less See more
  • Like
Reactions: 2
That's a bit different. What all did you have to do?

Sent from another garage.
moddify the the stock box... I have the Steeda intake now but has the same intake cutout and uses this same method. run the hose to the front grill

I was also given a Ford Performance snorkel so I have them right next to each other, figured more air the better

You can see in this picture the path that is runs.

Headlamp Vehicle Car Auto part Automotive lighting
See less See more
Coming soon!
RS Brembo Brakes (plans to paint them red)
Mountune Pads on all 4 (back ordered)
Factory RS rotors and replace ST rotors for rear (in the mail)
TCE SS brake lines (in the mail) (I have StopTech SS lines but the Brembos take a different fitting )


Brake Auto part Vehicle brake Crankset Bicycle part
See less See more
  • Like
Reactions: 1
1 - 20 of 162 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top