Ford Focus ST Forum banner

1 - 20 of 46 Posts

·
Registered
Joined
·
165 Posts
Those look rad, so a bolt on replacement for the whole quarter panel?

Thats the way it should be done, fifteen52 released their widebody bolt-on-trim set, but this is way cleaner. Gotta keep this on the radar.
 

·
Registered
Joined
·
33 Posts
Discussion Starter · #3 ·
Those look rad, so a bolt on replacement for the whole quarter panel?

Thats the way it should be done, fifteen52 released their widebody bolt-on-trim set, but this is way cleaner. Gotta keep this on the radar.
Yeah, exactly! A lot cleaner than fifteen52, or SS tuning front fenders. I like the vent too, and how it lines up with the body. They kind of look similar to the gt350 vents.

Unfortunately they didn't put the fenders on their RS at SEMA so there really isn't any pictures of it installed anywhere.


Sent from my iPhone using Tapatalk
 

·
Super Moderator
Joined
·
9,548 Posts
TYPE-GR CARBON FIBER FRONT FENDERS FOR 2016-UP FORD FOCUS RS (.04" WIDER) *ALSO FITS FOCUS 2012-2016 SE, S & ST

At only .04" wider it is really more of a replacement than an alternative to cover over sized wheels/tires.
 
  • Like
Reactions: hanyolo44

·
Registered
Joined
·
33 Posts
Discussion Starter · #5 ·
TYPE-GR CARBON FIBER FRONT FENDERS FOR 2016-UP FORD FOCUS RS (.04" WIDER) *ALSO FITS FOCUS 2012-2016 SE, S & ST

At only .04" wider it is really more of a replacement than an alternative to cover over sized wheels/tires.
That's definitely true, maybe for somebody who wants a less aggressive but custom look.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
428 Posts
Those look rad, so a bolt on replacement for the whole quarter panel?

Thats the way it should be done, fifteen52 released their widebody bolt-on-trim set, but this is way cleaner. Gotta keep this on the radar.
Full replacement parts are awesome, but that only works for the fenders; can't just unbolt a rear quarter on most cars. ;)
 

·
Registered
Joined
·
165 Posts
Full replacement parts are awesome, but that only works for the fenders; can't just unbolt a rear quarter on most cars.
This is true. For the front fenders I would be stoked to see a wide body kit incorporate full replacement,

The 1552 kit is pretty fire though, offered in Carbon has got me scheming.
 

·
Registered
Joined
·
1,125 Posts
I'll be ordering a set soon maybe the spoiler too hopefully @builtboosted will have positive things to say. I talked to Anderson composites and recommended a fiberglass version to keep costs down but they weren't hearing it. I found that interesting as they do it for the mustang products. What do I know, I'm just the guy behind the RSR hood. They are Anderson composites and do make some great stuff and have a good reputation as far as I know. I'm holding out that these will be an awesome fit and flow great with the car.
 

·
Registered
Joined
·
1,060 Posts
I'm receiving the parts tomorrow. I'll post up and let everyone know my impressions. I have high hopes.





I'll be ordering a set soon maybe the spoiler too hopefully @builtboosted will have positive things to say. I talked to Anderson composites and recommended a fiberglass version to keep costs down but they weren't hearing it. I found that interesting as they do it for the mustang products. What do I know, I'm just the guy behind the RSR hood. They are Anderson composites and do make some great stuff and have a good reputation as far as I know. I'm holding out that these will be an awesome fit and flow great with the car.



Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
33 Posts
Discussion Starter · #12 ·
I'm receiving the parts tomorrow. I'll post up and let everyone know my impressions. I have high hopes.










Sent from my iPhone using Tapatalk
Sounds great! Looking forward to seeing some pictures and hearing your thoughts on it.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,060 Posts
Ok guys. Here they are. Parts looks amazing, not a single flaw in any panel. Finish is amazing, even tho it's just resin. I will need to clear them for the UV protection after fitment. The spoiler i feel like should be in a carbon museum. The fenders look equally good but I will have to modify them due to my bag setup. Something I already planned for. All in all I'm very happy with the quality it's beyond perfect. Here are some pics



Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
440 Posts
I am very aroused by your pictures sir. Looking forward to seeing those installed.

Sent from my SM-G920T using Tapatalk
 

·
Registered
Joined
·
373 Posts
Ok guys. Here they are. Parts looks amazing, not a single flaw in any panel. Finish is amazing, even tho it's just resin. I will need to clear them for the UV protection after fitment. The spoiler i feel like should be in a carbon museum. The fenders look equally good but I will have to modify them due to my bag setup. Something I already planned for. All in all I'm very happy with the quality it's beyond perfect.
Damn those look like some high quality pieces! Kind of curious - why will the fenders need to be modified for bags?
 

·
Super Moderator
2017 Ford Fusion Sport
Joined
·
8,198 Posts
That spoiler would look incredible with my blue car :in love:
 
1 - 20 of 46 Posts
Top