Ford Focus ST Forum banner
1 - 3 of 3 Posts

·
Registered
2018 focus st
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi,
In my focus st couple days ago on highway abs light comes on with traction control and i lost power steering. I pulled over on side and after few minutes every lights turns off.

Yesterday lights turns on again and they stay’s on.
Every time when i start engine i can drive about one minute with no problem.

i already check sensors, and the problem is with front passenger side

i change front both sensors but still nothing.

And can Abs light be on if one axle is greasy?
 

·
Super Moderator
2014 ST3. Garrett GTX2860R Gen 2. FBO
Joined
·
7,194 Posts
The first thing you'll have to do is pull ABS and Power steering codes with a fully functional scan tool, or Forscan. There are a multitude of faults that will cause your symptoms. You need the codes.

Let us know what you have.
 

·
Super Moderator
2017 Kona Blue ST1
Joined
·
3,955 Posts
Hi,
In my focus st couple days ago on highway abs light comes on with traction control and i lost power steering. I pulled over on side and after few minutes every lights turns off.

Yesterday lights turns on again and they stay’s on.
Every time when i start engine i can drive about one minute with no problem.

i already check sensors, and the problem is with front passenger side

i change front both sensors but still nothing.

And can Abs light be on if one axle is greasy?
What the sensor reads wheel speed from is on the wheel bearing itself. But you will need to use something to read the data from the wheels I'd narrow it down. (Scan tool, Forscan, etc.)

You've already changed the sensors so looking at the signal would be the next logical step.

Any other recent work done?
 
1 - 3 of 3 Posts
Top