Ford Focus ST Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,832 Posts
Discussion Starter · #1 ·
I know you can buy 2012/2013 struts and associated lowering springs, and bolt them into a mid-year 2014+ model. Since there are not many spring options for the latter model years yet.

But what exactly is different on the 2012/2013 struts over the newer years? Is it tophats and lower spring perch? Or just the lower spring perch?

My goal is to not have to buy more parts than needed (e.g. upper tophats, upper perch etc) Just the required one-time use bolts, and proper year struts and be done...
 

·
Registered
Joined
·
1,832 Posts
Discussion Starter · #3 ·
Thanks. So the goal is Bilstein B8's to match to my KW lowering springs both for the 12/13 model, to go into my 2015.

I've ordered the bolts and such from tasca ford already, and took a gamble I didn't need the upper front parts.

What needs to be modded in the upper rear? And would that apply to my situation?
 

·
Registered
Joined
·
1,832 Posts
Discussion Starter · #5 ·
Well I'm done with adjustable anything. (Getting old) I hate koni's adjustment mechanism, had them on my last two cars and about 10+years or so between them. Can't stand that there are no adjustment detents, and that adjustment knobs flex as you turn them. Over time, they will need a firming up as well with an arbitrary twist of the knob. Coilovers, no thank you. Been there and done that with AST 4100's on swift springs. too many noises to contend with.

So bonus, no modifications needed. :)
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top