[godwillhunt]

Hey everyone,

I've researched these forums, googled, etc, and cant find out whether the electronic motor of a ST3 Recaro [electric seat] will work with the same-year seat plug module from an ST1. I'm know the heated seats wont work due to ST1 console, and that's ok, but will I be able to adjust the seat? Are the electronic plugs different? Any insight is appreciated, thanks.

 

[Allen_rubin]

Just did the swap, and yes it works. Butttttt you need to swap occupancy sensors on the passenger seats. Old to new new to old

 

[cheatingk9610]

Just did the swap, and yes it works. Butttttt you need to swap occupancy sensors on the passenger seats. Old to new new to old

Did you get the Airbags to still work with the new seats

 

[Allen_rubin]

I still need to get together with my buddy to swap the sensors. It's a tedious job but can be done. My SRS light is on until I can do that

 

[godwillhunt]

Just did the swap, and yes it works. Butttttt you need to swap occupancy sensors on the passenger seats. Old to new new to old

That means disassembling [unstitching] the seat correct? And are you referring to both [front] seats, or just pass seat?

 

[Allen_rubin]

No the sensor is under the seat, it's hooked up to a jelly pack which you gotta unplug the sensor and keep the jelly in the pack, it's just the passenger side.